press down the coffee/steam button “ ” and turn on the steam knob to check if the appliance
can produce steam normally when the steam indicator (green) illuminates. Please contact the
service department if the appliance can not produce steam after operate as above.
Note
: after steaming, we recommend you allow the maker to cool down at least for 5 min
before making coffee again. Otherwise burnt odor may occurred in your Espresso coffee.
If
you want to make coffee immediately, follow the next steps: First, press and release the
steam button “ ” to the higher position; dip the steam wand into a cup; secondly, press the
pump control button “
” down to the lower position and turn on the steam control knob and
there will be water flow out from steam wand ; after the ready indicator extinguish, press and
release the pump control button “
” to the higher position, then turn the steam control knob
to “O” position. When the ready indicator illuminate, you can start to brew coffee again.
FROTHING MILK/PRODUCING STEAM TO HEAT LIQUIDS
The steam wand can be used to froth milk and make hot beverages like drinking chocolate,
water or tea.
Method:
1. Remove the removable tank and fill it with desired water, the water level should not
exceed the “MAX” mark in the tank. Then insert the tank into the appliance properly.
2. Then connect the appliance to power supply.
3. Press down the ON/OFF
button “ ” to turn on the unit, the power indicator (red)
illuminates.
4. Press down the pump control button “
”
to the lower position, make sure the
