8. Then pressing and release the coffee/steam button “
”
to the higher position, when the
green lamp is illuminated, press down the pump control button “
”
to the lower position to
brew until no descaler is left.
9. Then brewing coffee (no coffee powder) with tap water in the MAX level, repeat the steps
of 4-6 for 3 times (it is not necessary to wait 15 minutes in step of 6), then brewing until no
water is left in the tank.
10. Repeat the step of 9 at least 3 times to make sure the piping is cleanly.
TROUBLE SHOOTING
Symptom
Cause
Corrections
Water leaks from the bottom
of coffee maker.
There is much water in the
drip tray.
Please clean the drip tray.
The
coffee
maker
is
malfunction.
Please contact with the
authorized service facility
for repairing.
Water leaks out of outer side
of filter.
There
is
some
coffee
powder on filter edge.
Get rid of them.
Acid (vinegar) taste exists in
Espresso coffee.
No clean correctly after
cleaning mineral deposits.
Clean coffee maker per the
content in
“
before the first
use
”
for several times.
The coffee powder is stored
in a hot, wet place for a
long
time.
The
coffee
powder turns bad.
Please use fresh coffee
powder, or store unused
coffee powder in a cool, dry
place. After opening a
package of coffee powder,
reseal it tightly and store it
in a refrigerator to maintain
its freshness.
The coffee maker cannot work
any more.
The power outlet is not
plugged well.
Plug the power cord into a
wall outlet correctly, if the
appliance still does not
work, please contact with
the
authorized
service
facility for repairing.
The steam cannot froth.
The steam ready indicator is
not illuminated.
Only after the steam ready
indicator is illuminated, the
steam can be used to froth.
The container is too big or
the shape is not fit.
Use high and narrow cup.
