background image

04    FUNDAMENTAL SAFETY RULES / PRODUCT RANGE   

Remember that some fundamental safety rules should be followed when 
using a product that uses electricity and water, such as:

It is forbidden for the appliance to be used by children or unassisted disabled 
persons.

It is forbidden to touch the appliance with wet hands or body when barefoot.

It is forbidden to carry out any cleaning before having disconnected the 
appliance from the electricity mains supply by turning the system master 
switch to “OFF”.

It is forbidden to modify the safety or adjustment devices or adjust without 
authorisation and indications of the manufacturer.

It is forbidden to pull, cut or knot the electrical cables coming out of the 
appliance, even if it is disconnected from the mains supply.

It is forbidden to poke objects or anything else through the inlet or outlet grills.

It is forbidden to open the doors which access the internal parts of the 
appliance without first turning the system master switch to “OFF”.

It is forbidden to dispose of or leave in the reach of children the packaging 
materials which could become a source of danger.

It is forbidden to climb onto the appliance or rest any object on it.  

The external parts of the appliance can reach temperatures of more than 
70°C. 

The VASCO NIVA FCU is offered in 3 sizes with different performances and 
dimensions. 

FUNDAMENTAL 

SAFETY RULES

PRODUCT RANGE 

Содержание NIVA FC115




















Отзывы: