Vasco NIVA FC115 Скачать руководство пользователя страница 4

After unpacking, make sure that all the components are present.
If not, contact the VASCO agent who sold the appliance to you.

VASCO appliances must be installed by an authorised installer.

These appliances have been designed both for conditioning and/or heating
environments and must be destined for this use only and compatibly with their
performance characteristics.

VASCO accepts no responsibility, either contractual or extra-contractual, for
any damage caused to persons, animals of property as a result of incorrect
installation, adjustment or maintenance or improper use.

In case of water leaks, turn the master switch of the system to “OFF” and
close the water taps.
As soon as possible, call the VASCO technical service department or else
professionally qualified personnel and do not intervene personally on the
appliance.

If the appliance is not used for a log period of time, the following operations
should be performed:
- Turn the master switch of the system to “OFF”
- Close the water taps
- If there is the risk of freezing, make sure that anti-freeze has been added to
the system otherwise empty the system.

If the room temperature is too low ot too high it is damaging for the health and
is also a useless waste of energy.
Avoid prolonged contact with the direct air flow.

Do not leave the room closed for long periods. Periodically open the windows
to ensure a correct change of air.

This instruction leaflet is an integral part of the appliance and consequently
must be kept carefully and must ALWAYS accompany the appliance, even
when it is passed to a new owner or user or transferred onto another system.
If it is lost or damaged, please contact the local VASCO technical service
centre.

All repair or maintenance interventions must be performed by the technical
service department or by professionally qualified personnel as foreseen in
this booklet. Do not modify or intervene on the appliance as this could create
dangerous situations and the manufacturer will not be responsible for any
damage caused.

Danger from burns - take care when touching

 1  GENERAL

GENERAL WARNINGS

   GENERAL WARNINGS    03

NL

FR

DE

EN

IT

PL

Содержание NIVA FC115




















Отзывы: