Varta pulse neo Скачать руководство пользователя страница 55

Страница: 55 / 80

Lift the battery module from the holding rails.

Installing the battery module

Reinstall the battery module in exactly the reverse order. (See chapter: 11.14 “Battery
module assembly”, page 37.)

Clean ventilator and air filter

The air filter must be replaced at every second service. The ventilator is accessible after the hood is
opened.

Clean the grid on the air filter.

Clean the air filter with a vacuum cleaner or replace it.

Check the ventilator for soiling and clean it if necessary.

Check the bearing clearance and the free movement of the ventilator by hand.

If the ventilator needs to be replaced, please contact VARTA Storage.

Completing service and repair works

DANGER

Touching live parts.

Danger to life.

Remove all tools and/or small parts from the interior.

Create all the cable connections correctly.

Check all the cable ducts.

Check all the safety equipment.

Ensure that there are no persons in the danger zone before switching on
the energy.

Содержание pulse neo

















































































Результаты поиска

Содержание pulse neo

Отзывы:

Похожие инструкции для pulse neo

Бренды по названию

Популярные бренды

Varta pulse neo, Руководство по эксплуатации

Результаты поиска

Содержание pulse neo

Отзывы:

Похожие инструкции для pulse neo

Бренды по названию

Популярные бренды