Varitronics VariOuest Cutout Maker 1800, Руководство пользователя

Страница: 29 / 46

VariQuest
®
Cutout Maker 1800 User’s Guide 5-1
5
Maintenance
This chapter describes the periodic maintenance procedures required during normal
operation of the Cutout Maker.
The chapter contains these sections:
• “Maintenance Summary” on page 5-1
• “Replacing the Cutting Blade” on page 5-2
• “Replacing the Cutting Mat” on page 5-6
• “Oil Gantry Rails” on page 5-10
• “Clean Tip Sensor” on page 5-11
Maintenance Summary
Maintenance Occurrence
Reason for
Maintenance Description
Clean mat with
Isopropyl Alcohol
(IPA) Weekly or as
needed
Material to be cut moves
while being cut. Use IPA and a lint-free cloth. Turn
power off. Apply IPA to cloth and
wipe. Mat should be slightly tacky
when rubbed with the bare hand.
Change blade Monthly or as
needed
Cutouts exhibit an
unacceptable amount of
tears. See “Replacing the Cutting Blade”
on page 5-2.
Change mat Yearly Material to be cut moves
while being cut. See “Replacing the Cutting Mat” on
page 5-6.
Oil gantry rails Yearly Rails exhibit signs of wear.
Slight grinding is felt when
moving cutter head
manually. See “Oil Gantry Rails” on page 5-
10.
Clean tip sensor Weekly or as
needed
Maintain optimum cut
quality. See “Clean Tip Sensor” on page 5-
11.