VariQuest
®
Cutout Maker 1800 User’s Guide
3-5
Setting up the Cutout Maker
Connecting the Power Cord
Setting up the Cutout Maker
Connecting the Power Cord
WARNING
Never operate the Cutout Maker in an area where it can get wet
CAUTION!
CAUTION!
Always connect the power cord to the Cutout Maker before inserting the plug into
a wall socket
Connect the power cord to the Cutout Maker. Then insert the power plug into a
grounded three-prong wall socket.
1.
Set the power switch to its “0” (OFF) position.
2.
The power cord had a three-prong female connector on one end that must be
inserted into the male power receptacle on the left side of the Cutout Maker.
3.
Plug the other end of the cord into an appropriate AC outlet (wall socket).
No.
Description
1
Wall Socket
2
USB Cable Receptacle
3
Power Cord Receptacle
4
Power Switch (1=ON, 0=OFF)
5
Power Cord
6
Cutout Maker Power Plug
1
6
2
3
5
4
