Variquest Perfecta 3600STP, Руководство пользователя

Страница: 78 / 231

4-8
VariQuest
®
Perfecta™ 3600STP
User’s Guide
Advanced Print Settings
Choose Margins Options
Choose Margins Options
By default, the printer leaves a 5 mm margin between the edges of your image
and the edges of the paper, increased to 17 mm at the foot of cut-sheet paper.
However, you can change these settings.
To change margins options:
1. In the Windows driver dialog, select the Paper/Quality tab.
2. Click the Margins/Layout button.
3. Choose from the following options.:
• Standard . The image will be printed on the selected paper size, with the
default margin between the edges of the image and the edges of the paper. The
image should be small enough to fit between the margins.
• Oversize . You should load paper that is larger than the size you selected in
the application or driver. If you cut off the margins after printing, you will be left
with a page of the size you selected, with no margins remaining between your
image and the edges of the paper. This is useful when you want your image to
cover the whole area of the paper.
• Clip Contents By Margins . The image will be printed on the selected paper
size, with the default margin between the edges of the image and the edges of
the paper. In this case, if the image is the same size as the page, the printer
assumes that the extreme edges of the image are either white or unimportant,
and do not need to be printed. This may be useful when your image already
contains a border.
Print on Loaded Paper
To print a job on whichever paper is loaded in the printer:
• In the printer driver
Paper Type
option, select Use printer settings/Any .
• In the Windows driver dialog, select
Paper/Quality
tab, then in the
Paper Type
drop-down list, select User printer settings .