Formular-Nr.:71 Rev.-Nr.:07 03/18
-7-
Defining and checking pitch adjustments
It is quite possible to set the pitch continuously variable and independently for forward and reverse. The
turning of the adjusting screws (2) & (4) at pages 5 & 6 by quarter a revolution ( 90° ) changes the pitch
approx. 1,5“.That means a half turn ( 180° ) changes the pitch by 3” etc..
For a check of pitch adjustments there are markings on the hub face under the housing cap.
To return to original factory pitch settings, line up
“AH” or “V”
resp.
“AS” or “R”
markings on the hub face.
Example:
check adjustments ahead
inner marking has moved
original factory pitch setting pitch has been increased ahead
ahead
check adjustments astern
inner marking has moved
original factory pitch setting pitch has been decreased astern
astern
NOTE :
If the engine does not reach the desired RPM reduce the pitch.
If the engine exceeds the desired RPM increase the pitch.
1,5” of pitch reduction / increase results in approx. 150 engine revolutions increase / reduction.
plus
minus
markings
line up
markings
lined up
