Varimixer ERGO60, Руководство по эксплуатации

Страница: 11 / 24

11
o
Verload
:
Do not overload the mixer. Sticky and heavy doughs
can overload the mixer. Overloading is further exac-
erbated if the speed of the mixing tool is increased
beyond the recommended values or if a wrong mixing
tool is used. Large lumps of fat or cooled ingredients
must be cut into small parts before they are placed
in the bowl.
If the mixer is overloaded for an extended period, it
will cut out. An error code will show on the display.
Follow the instructions for ”Procedure in case of
overloading”
P
roCedure In CaSe of oVerloadInG
:
• Push emergency stop.
• Open the bowl screen.
• Reduce the bowl contents.
• Close the bowl screen and release the emergency stop.
• If the error code is still shown on the display, see the “Er-
ror codes”
section on
page 12.
If the emergency stop has been activated while the mixer is
running with a full bowl, it may be necessary to lower the bowl
in order to empty it.
• Release the emergency stop to connect the power to
the mixer.
• Lower the bowl and empty it.
• Now the mixer can be used as normal again.
h
ow to brInG a mIxer to StoP
:
If the mixer stopped after the bowl screen has been opened, it
can be re-started by pressing twice (the first press resets
the mixer’s safety switch).
The mixer should only be stopped using the emer-
gency button if there is an emergency.
r
eadInG the number of oPeratInG hourS
/
dayS
/
yearS
:
It is possible to read how long the mixer has been in opera-
tion (operation = tool revolving). The total time is read as a
combination of hours, days and years; see below:
• Press the emergency stop
• Press and the number of hours the mixer has been
operating will be displayed, e.g.: if it shows 157, this means
1 hour and 57 minutes
• Press and the number of years and days the mixer
has been operating will be displayed, e.g.: if it shows 1120,
this means 1 year and 120 days.
r
eSettInG the Control SyStem
:
• Press the emergency stop
• Press for 10 seconds.