background image

7

C

ontrol

 P

anel

 Vl4:

Bowl up

To raise the bowl, press 

the 

 + 

 + 

  fields 

simultaneously and con-

stantly until the bowl 

reaches the top.

Start/Stop

Bowl down

Lowers the bowl once the 

mixer has stopped. If this 

field is activated while the 

mixer is running, the bowl 

will be lowered auto-

matically when the mixer 

stops.

Pause

Must always be used when inspecting the product in the 

bowl. Also used to reset the control system; see 

”Reset-

ting the control system”,

 

page 11

.

Time up

Used to set operation time. The time can be set before/

after starting the mixer and can be changed while the 

mixer is running.

Text field / display

Displays operation time, 

programme numbers and 

error codes from the motor 

and frequency transformer

Time down

Used to set operation time.

The time can be set before/

after starting the mixer and can 

be changed while the mixer is 

running.

Fixed speeds

Four pre-defined speeds.

Speed indicator

Displays the running speed 

of the mixer.

Speed down

Used to change speed while 

the mixer is running.

Speed up

Used to change speed while 

the mixer is running.

REMIX

Used to store a recipe. 

See the section

 ”REMIX 

function”.

r

emIx

 

funCtIon

:

The special Remix-function is a shortcut to programming of 

recipes. While the mixer is operated, all commands are stored, 

and when a recipe is finished and 

, is pushed, it is possible 

to store the entire recipe under a program number.

• 

There are 20 program numbers: 1, 2, 3, 4 - 11, 12, 13, 

14 - 21, 22, 23, 24 - 31, 32, 33, 34 - 41, 42, 43, 44

• 

A program cannot be deleted, but can be replaced.

• 

The programs are not deleted in case of no power

How to store a program:

Program number 12 in this example

• 

Start by pressing 

.

• 

Run the whole recipe, including pauses, changes of speed 

and automatic lowering of the bowl.

• 

Press 

 to stop the mixer.

• 

Keep 

 depressed; the display shows 

 .

• 

Continue pressing 

 and press 

 and 

 as well, 

 is shown on the display

• 

Release 

 and the program will be stored as number 

12

How to run a program:

Program number 12 in this example:

 

First a short push on 

 and then on 

 and 

. Now 

 

appears in the text field and immediately thereafter 

the total length of the program will be shown. The program 

is run by pushing 

.

•  If the speed or the time is changed, when running a pro

-

gram, 

the program will be left

 and the mixer must be 

run manually. 

•  If 

 is pressed while a program is running, the mixer 

stops and 

quits the program

.

•  If the bowl screen is opened while a program is running, 

the mixer stops and 

 will be displayed. When the 

bowl screen is closed again, press 

; twice; the first 

press eliminates the error code and the second press 

starts the mixer – 

the program quits

.

•  If the program is containing a pause, the mixer will stop 

and at the same time an acoustic signal is heard. It is 

now possible to lower the bowl and open the bowl screen. 

When the operator wants to restart the mixer, push 

 

and 

the program will be resumed.

Содержание ERGO60

























Отзывы: