Varifan CPS-3M, Руководство пользователя

Страница: 27 / 44

Page 27
ZONE 1 MAIN SET POINT TEMPERATURE
(MANUAL MODE)
The main set point establishes the target
temperature in the building. The main set point
temperature is adjusted in 0.5 degree
increments from a minimum setting of 42.0°F
(5.5°C) to a maximum setting of 111°F (44.0°
C).
Adjusting the main set point temperature:
•
rotate the selector dial to position (11),
•
rotate the adjustor dial counterclockwise to
decrease the setting, and clockwise to increase
it.
The main set point temperature is displayed on
the CPS-3M.
Manual mode:
The actuator motor may be manually controlled
by adjusting the main set point to OPN or CLO,
thereby causing the air inlet to either remain
fully open or closed.
To open the air inlet:
•
rotate the selector dial to position (11), then,
the adjustor dial counterclockwise to the
minimum setting, until the display shows OPN.
At that particular moment, the air inlet is
opening
To close the air inlet:
•
rotate the selector dial to position (11), then,
the adjustor dial clockwise to the maximum
setting, until the display shows CLO. At that
particular moment, the air inlet is closing.
CHAPTER 3 - USER’S GUIDE
www.monitrol.com