Varifan CPS-3M, Руководство пользователя

Страница: 7 / 44

Page 7
Chapter 2 describes the installation of the CPS-3M control.
2.1 UNPACKING
Unpack the CPS-3M from its box and inspect contents for
damage. Should the contents appear to be damaged,
contact your local distributor to return the material .
The package should contain the following standard items:
•
1 CPS-3M control
•
3 cable fasteners
•
2 temperature probes
The following optional items may be included:
•
3 additional temperature probes per zone for
temperature averaging.
2.2 MOUNTING
Use a screwdriver to remove the faceplate and the plate on
the power compartment.
Mounting hardware is not included.
CHAPTER 2 - INSTALLATION
The manufacturer recommends that the installation
instructions which follow be adhered to as closely as
possible, and all work be performed by a certified
electrician. Failure to do so may void the warranty!
To limit the unit’s exposure to noxious gases install the
unit in a hallway.
Make sure the unit is properly installed, that is, side up
with the cable entry holes facing down.
The CPS-3M will operate in a temperature range of 32°F
to 120°F (0°C to 50°C).
The enclosure is watertight, it is not splash proof or
immersion proof. DO NOT WATER the control. Cover it
carefully with plastic when cleaning the room.
www.monitrol.com