Varifan CPS-3M, Руководство пользователя

Страница: 8 / 44

Page 8
CPS-3M
Once both faceplates are off, install the mounting screw on the wall
and install the unit on it. Use two more screws to secure the CPS-
3M in place using the bottom mounting holes.
2.3 SWITCH SETTING
The CPS-3M is configured for a variety of options via the
two following switches:
2.3.1 - Line Voltage Selector Switch
This switch is located on the surface of the main (bottom)
board and adapts the CPS-3M to 115 VAC or 230 VAC line
voltage.
See figure 1
2.3.2 - Software setting switch
This switch is located in the back of the CPS-3M faceplate
and regulates the following options:
1
2
3
4
Switch 1: Selects between a Fahrenheit or Celcius display
on the front panel.
Switch 2: Locks/unlocks user settings. Locked settings :
all settings are locked except for set points in positions (11)
and (2).Hi and Lo positions (8), (9) and (4) (5) can be
cleared in locked settings.
Unlocked settings : all
parameters may be modified or cleared.
Switch 3: Selects the number of zones
Switch 4:
Not used
230V
115V
OFF ON
Fahrenheit
Settings locked
1 zone
Not used Celcius
Settings unlocked
2 zones
Not used
OFF ON
www.monitrol.com