Vari BDR-1200, Руководство пользователя

Страница: 18 / 54

BDR-1200

When operating the machine, use work aids approved by ČSN EN 166 or ČSN EN 1731 (tight clothes, firm shoes, work gloves and protective
goggles). Keep a safe distance form the machine given by its handle.
 Do not start the engine in closed spaces! Pay special attention when handling the machine. The engine exhaust muffler remains hot after the
engine is switched off. While adding the fuel, make sure it does not leak or spill over engine parts. If the fuel is spilled, dry the soiled parts or
wait for the fuel to evaporate.

When the machine is being operated, all other persons (especially children) and animals must stay out of the machine's workspace. The
machine attendant can only continue working after taking these into a safe
33 distance.

It is forbidden to remove any protective devices and covers from the machines.

Safe 34 climbing ability of the machine is 10º. Maximum engine tilt while working is 20º for long and 30º for short 35 periods.
 Any machine repairs, adjustments, greasing and cleaning is to be carried out when the machine is turned off and disconnected spark plug.
2.2.2 Noise and vibration figurese
➢ Declared emission level of the acoustic pressure A at attendance point 36 (LpAd = 87,5 +1,5 dB)
➢ Guaranteed acoustic power level A 37 (L
WA,G
= 102dB)
➢
Declared aggregate acceleration value of the vibrations transferred onto the hand-arm of the machine attendant
38
a
hvd
= (3,4 +1,7 ) m.s
-2
2.2.3 Safety pictographs
The user is required to keep the machine pictographs readable, and have them exchanged in case they are damaged.
Location: Figure: Number: Description:
On the upper cover of the gearbox Fig.18
(1) Do not touch the V-belt compartment.Do not touch the V-belt compartment.
(2) Turning on the machine wheel drive. ‘0’ = the machine is standing still, ‘1’ = the
machine is moving
Travel clutch lever on the left handle Fig.19 -
Turning on the machine wheel drive. ‘0’ = the machine is standing still, ‘1’ = the
machine is moving
Drive clutch lever on the right handle Fig.20 -
Turning on the cutting disc wheel drive. ‘0’ = the cutting disc is not rotating, ‘1’ =
the cutting disc is rotating
On the upper cover of the gearbox Fig.21
(1)
(2)
(3)
Study the machine manual before operating the machine.
Spark plug cable must be disconnected during machine maintenance.
Do not reach with your arm nor step with your leg into the cutting blade work
space – risk of cutting.
On the upper cover of the gearbox Fig.22
(1)
(2)
Area forbidden for other persons and animals. Minimum safe distance from the
machine.
Risk of injury form chippings, cut-offs, flying objects, etc. Other persons and
animals - keep safe distance from the machine.
On the upper cover of the gearbox Fig.23 - Guaranteed sound decibel level of the machine.
On the handlebar turn plate Fig.24
(1)
(2)
Fuel recommended
Fire hazard
On the cutting mechanism plastic cover Fig.25 - Cutting discs rotation direction
Table 2: Safety pictographs
2.3 Basic information
2.3.1 Machine use
The BDR-1200 double-drum mower is designed and manufactured according to the most current knowledge in the field of small garden and
agricultural machinery. It is characterised by its easy handling, quiet, efficient and economy HONDA engine, as well as by trouble-free maintenance.
This double-drum mower is designed for mowing high thin-stalk grass stands on meadows up to max. height of 100 cm on maintained
39
areas. There
must be no solid objects in the stand or extensive undulations. The mower is not designed for grass surface landscaping.
 The use of this machine for purposes other than those it was designed for is then considered as unauthorised use!
33 The EN 12733 and CSN EN 12733 standards regulate the definition of outer safe area A around workplace B. In doing so, appropriate banning signs must prevent from
entry into this area. The distance between each side of the A and B areas must not be less than 50m.Once a person or an animal enter this area, the machine operator has
to release the cutting mechanism lever immediately, and wait until the area is free of any persons or animals again.
34 Do not use the machine on wet grass. You have to move on a safe terrain at any time. Work in walking, never run. Be extremely careful mainly when changing direction on
slopes. Do not mow on extreme down hills. If you fall accidentally, do not hold the machine but release it.
35 In short time= within one minute.
36 According to CSN EN 836+A1/A2, Annex H, and CSN EN ISO 11 201
37 According to manualline 2000/14/EC (equivalent to NV No.9/2002 Coll, Annex 3, Part B, Pa.33) and CSN ISO 3744;
38 According to CSN EN 836+A1/A2, Annex G, and CSN EN ISO 20643.
39 Vegetation on area shall be mowed and raked at least once a year!
20