3
User ManUal
912400575001UM
w w w.VA R i - L i T E .c o M
iNSTALLATioN AND SETUP
1.
MOUnTInG
The unit should be mounted via its screw holes on the bracket. Always ensure
that the unit is firmly fixed to avoid vibration and slipping while operating. Always
ensure that the structure to which you are attaching the unit is secure and is able
to support a weight of 10 times of the unit’s weight. Always use a safety cable that
can hold up to 12 times the weight of the unit when installing the fixture.
The luminaire must be mounted by professionals.
2.
seT UP
COnTrOl Panel
MaIn FUnCTIOns
To select any functions, press the MENU button until the required one is shown on the display. Select the func-
tion by the ENTER button and the display will blink. Use the DOWN and UP button to change the mode. Once
the required mode has been selected, press the ENTER button to setup or it will automatically return to the
main functions without any change after idling one minute. Back to the functions without any change press the
MENU button. The main functions are shown in
1
lCD display - shows the menu and selected functions
2 Buttons:
MenU
- To select the programming functions
DOWn
- To go backward in the selected functions
UP
- To go forward in the selected functions
enTer - To confirm the selected functions
3
DMX In - 5-pin Xlr cable to link DMX console
4
DMX OUT - 5-pin Xlr cable to link to the next unit
5
Power In - connacts to power supply
6
Power Out - connects to next fixture
Содержание BeamLine VL800
Страница 1: ...VL800 EVENTPAR RGBA User Manual...