VLC5501 User manual
8
Changing PIN codes:
Re-setting the Master PIN code from the Factory default ‘0000’ PIN code:
In order to change the Factory default PIN code, proceed as follows:
1.
Turn ON the vehicle’s ignition, the keypad backlight and red LED will illuminate.
2.
Enter the Factory PIN code ‘0000’, and then press
#
to confirm it. If the factory PIN code has
been entered correctly, the system will give two short beeps, and the green LED light illuminates.
3.
Within 5 seconds, press and hold
#
and
buttons together, the keypad emits two short beeps.
4.
Enter the new PIN code (4 to 8 digits) and press
#
to confirm it.
5.
Repeat the new PIN code and press
#
to confirm it.
6.
Enter ‘0’ and press
#
to confirm it.
(‘0’ is the default memory location for the master code)
Note!!!
If you make a mistake whilst entering the PIN code, turn the ignition OFF and start again from step1.
If all of the above steps have been followed correctly, the keypad will emit two short beeps to confirm
the new Master PIN code, turn off then back on the ignition to test new Master code.
From this moment on, this code is known as the Master PIN code. Only the Master PIN code has
master access level, it can be used to manage and disarm the security system.
Changing the Master PIN code:
If it is necessary to change the Master PIN code, follow the instructions for
‘Changing the Factory
default PIN code’
above, substituting the factory ‘0000’ PIN for the current Master PIN code.
If the Master PIN code has been lost or forgotten, then follow the instructions for
‘Enter the
Overriding PIN code’
further on in this section.
Содержание VLC5501
Страница 2: ...VLC5501 User manual 2...
