Vapormatic VLC5501 Скачать руководство пользователя страница 10

VLC5501 User manual

10

Forgotten passwords:

If the Master code and or any of the user codes are forgotten, the keypad memory can be reset back to
factory default. This will delete all stored user codes and set the Master code back to ‘0000’.

Please follow the instructions below in the PIN code card section.

PIN code card:

This card contains the serial number of your system and a unique 8 digit override PIN code.

Serial number:

 This is required if you need to order a replacement Keypad or Keypad Override

Disc.

8 digit Override PIN code:

 This is required if the Maser code or user codes have been forgotten.

If entered will restore the keypad memory back to factory settings.  This means that all User codes will
be deleted and the Master code will be reset to ‘0000’.

If for any reason the keypad Master PIN code has been lost or forgotten, the eight digit master override
code can be found on the PIN code card, by scratching off the protection layer.

The serial number will be required if ordering a replacement Keypad or Keypad Override Disc.

Enter the Overriding PIN code:

Note:

 The overriding PIN code will be found on the PIN code card supplied. (See code definitions).

Warning!!!
After the Overriding code has been entered, the security system will delete all stored PIN codes from
memory, and the factory PIN code ‘0000’ will be re-set (see Factory PIN code).

To enter the Overriding PIN code:

1.

Turn ON the vehicle’s ignition, wait until the red LED on the keypad illuminates and you hear
one short beep sound.

2.

Press and hold the button

*

for 5 seconds, the system will give you one short beep.

3.

Enter your 8 digit Overriding PIN code. Press

# to confirm

4.

If the correct PIN code has been entered, you will hear 6 short beeps, the red LED will stay
on.  The security system is now set to factory default settings.

5.

Turn off and then back on the ignition and enter ‘0000’ to activate the system. A new Master
PIN code should now be set

(see Setting the Master PIN code from the Factory default ‘0000’

PIN code from previous section)

.

Содержание VLC5501



















Отзывы: