VLC5501 User manual
12
Fault finding chart:
Is the Keypad Override Disc with in a 5 metre range.
Remove battery and wait five minutes, re-insert battery
and check red LED on printed circuit board flashes once
(refer to the Keypad Override Disc Replacement
Battery section)
If no red LED, order new Keypad Override Disc
Keypad Override disc not working
Disassemble Keypad Override Disc and replace battery
Is the correct code being entered
Is the code being confirmed by pressing the
#
button
Keypad not accepting Master code
Reset keypad memory back to factory settings using the
PIN code card. (refer to PIN Code Card section)
Is the current Master code been entered correctly
Has the
*
and
#
buttons been pressed together within 5
seconds
Is the code being confirmed by pressing the
#
button
Has the new Master code been entered correctly twice
and confirmed
Can not change Master code
Is the correct memory location of ‘0’ being used and
confirmed by pressing the
#
button
Has the
*
and
#
buttons been pressed together within 5
seconds
Is the Master code being entered first to confirm
authority
Has the new User code been entered correctly twice and
confirmed
Not able to add a User code
Is the 1 to 5 memory location being entered and
confirmed by pressing the
#
button
Is the Master code being entered first to confirm
authority
Is the 1 to 5 memory location being entered and
confirmed by pressing the
#
button
Not able to delete a User code
Reset keypad memory back to factory reset. This will
delete all data and set the Master code to ‘0000’. The
Master code will need to be changed, and all User codes
re-entered
Is the ignition switched on
Is the Keypad Override Disc with in a 5 metre range
Keypad Red LED not working
Refer to installation manual to diagnose wiring fault
Содержание VLC5501
Страница 2: ...VLC5501 User manual 2...
