27
10.2
Cleaning the HERBIE Vaporizer
The HERBIE Vaporizer can be disassembled and reassembled for cleaning purposes.
The Cleaning Brush, cotton swabs and paper or cotton towels may be used for cleaning. As solvent, we
recommend alcohol (ethanol) or warm water with wash-up liquid.
For optimal airflow, please ensure the top cap and mouthpiece are clean and free from debris
blockage.
WARNING!
Never clean the insulators with alcohol. In case of contamination, use only warm water
and cotton swabs.
CAUTION!
Do not immerse any components in alcohol or ethanol for longer than 30 minutes. Extended contact
with alcohol or ethanol can lead to discoloration.
Before assembling allow all component parts to dry properly..
After cleaning, check all component parts for surface damage, tears, softening or hardening,
impurities, distortion and discoloration and set damaged component parts aside.
WARNING!
Alcohol (ethanol) is flammable and may easily ignite
11
Accessories
Various accessories can be purchased for the HERBIE Vaporizer. These are explained in more detail
below.
11.1
ByPass-Air-Kit
CAUTION! Hot surfaces!
Always disconnect the Vaporizer from the box mod each time you disassemble it! Let the
Vaporizer cool down before disassembly!
There are two main reasons for using the ByPass-Air-Kit. The first reason is that the vapor is still too
hot for the user despite the glass mouthpiece. The second reason is that the HERBIE Vaporizer with
the glass mouthpiece is too conspicuous. The installation of a shorter mouthpiece would bring the look
of the Vaporizer closer to that of a standard e-cigarette.
