19
To use, place the mouthpiece between your lips. Keep the fire button pressed and start inhaling. Inhale
slowly at first and accelerate the inhalation if you feel that the vapor production increases. Release the
button, then breathe out and adjust the settings accordingly. Please note the following with regard to
vapor production: The more intense the vapor, the more the taste is affected.
CAUTION! Hot surfaces!
Do not touch the filling chamber as long as it has not cooled down after use with the
HERBIE Vaporizer.
CAUTION!
A very high intensity (density) of the vapor can lead to irritation of the
respiratory passages from the concentration of the aromas and fragrances. In this
case, the temperature should be lowered, so that the intensity of the vapors is
reduced. The temperature can be reduced on the one hand by reducing the power
(watts) at the box mod or by opening the air inlet completely.
CAUTION!
The device is not to be used, if the user has respiratory tract or lung
conditions. Depending on the density, the vapor could irritate respiratory tracts or
lungs, which can lead to coughing.
TIP:
Inhale only half of air you can normally manage. Hold your breath for a few seconds
and exhale slowly. It is advisable to deliberately concentrate on your breathing process.
After vaporization, turn off the HERBIE Vaporizer / the box mod.
10
Disassembling and cleaning
When the plant parts are vaped, a small part of them inevitably condenses on the surfaces inside the
vaporizer.
The parts of the vaporizer must be thoroughly cleaned regularly to ensure proper functioning and a
clean taste.
For hygienic reasons, it is also necessary to clean these components when the Vaporizer is to be used
by a different person.
10.1
Disassembling the HERBIE Vaporizer
The following is a step-by-step description of how to disassemble the HERBIE Vaporizer.
Remove all plant parts from the filling chamber before disassembling.
CAUTION! Hot surfaces!
Always disconnect the Vaporizer from the box mod each time you disassemble it! Let the
Vaporizer cool down before disassembly!
