17
Remove the lower mesh clamp. Now the mesh can be replaced by a new one.
Only use original Vape Engineering parts. Meshes are available as accessories.
Once the new screen is inserted into the shell, the lower mesh clamp can be reinstalled. Now
reassemble the shell with the housing. Reassemble the housing on the base and screw the top cap to
the housing.
Now connect the Vaporizer to the box mod again.
8.6
Replacing the upper mesh
As already described in chapter "Filling the herb chamber", it is necessary to replace the meshes of the
filling chamber from time to time.
CAUTION! Hot surfaces!
Always disconnect the Vaporizer from the box mod each time you disassemble it! Let the
Vaporizer cool down before disassembly!
Unscrew the top cap.
