manualshive.com logo in svg

Vapac VIRTUOSO VE05-1P, Инструкция по установке и эксплуатации

Поделиться
Скачать
Vapac VIRTUOSO VE05-1P Скачать руководство пользователя страница 11

Vapac, Virtuoso VE Humidifier, Installation Manual, EN 2024-01, D301474 Iss 0   Page No 11 of 80 

I

Fig 1a - Unit on pallet with cardboard outer secured by 
banding

Fig 1b - Unit on pallet, banding removed, lifting cardboard 
outer

Fig 1c - Unit on pallet and cardboard base with cardboard outer 
removed

Fig 1d - Unit on pallet with cardboard outer removed and front 
flap of base folded down, front panel removed

List of accessories supplied

The following accessories are supplied with the 
Virtuoso VE Steam Humidifier:

•  Bracket for wall mounting the humidifier 

(supplied bolted to the back of the unit).

•  2 adjustable hose clips per steam outlet for 

the connection of steam hose.

•  Water supply inlet feed flexible pipe per 

water supply connection.

•  Installation manual (this document).

•  Printed template to assist in the location of 

the unit mounting bracket.

Front panels have a simple blade lock that may 
be opened using a suitably sized flat blade 
screwdriver; no keys are required or provided.

Содержание VIRTUOSO VE05-1P

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды