Vespera Instruction Manual v1.2 EN 2022-06 3
-
Vespera should never be pointed at the sun without a proper f ilter, placed on the lens.
-
When using a mains charger, you are responsible f or its proper use. The use of the charger must
be in accordance with the manufacturer’s recommendations. Vaonis can not be held responsible
f or any damage caused by a mains charger.
-
This instrument is composed of fragile optical, mechanical and electronic components. Protect the
instrument as much as possible f rom shocks and vibrations in order to improve the lif e of your
Vespera..
-
Do not open the instrument. Do not attempt to disassemble, modify or repair the instrument as this
will void the warranty. Contact support by email at
-
Use only the accessories supplied by Vaonis and respect the conditions of use recommended by
Vaonis.
-
Unplug the device in case of thunderstorms or when it is not used f or a long period of time..
-
Use the product at temperatures between 0°C and 40°C.
-
Store the product in a clean and dry place (pref erably at room temperature and humidity less than
65°C).
-
Do not immerse the product in water.
-
Vespera is not a toy.
-
The product is not intended f or use by children under the age of 14.
-
This product may be used by children of at least 14 years of age and by persons with reduced
physical, sensory or mental capabilities or lack of experience, if they are properly supervised or
instructed in the saf e use of the product and are aware of the risks involved.
-
Children must not play with the device.
-
Cleaning and maintenance by the user must not be carried out by unsupervised children.
-
Do not use chemical solvents (e.g. alcohol, thinner) or other f lammable cleaning f luids t o clean the
product or its accessories.
-
Do not dispose of the product in a f ire, nor with household products as there is a risk of explosion
of the battery; ref er to chapter XI of this document.
IV. Installation
Attaching Vespera to the tripod and positioning the tripod
1. Mount the tripod: screw the 3 legs to the tripod base.
2. Lay Vespera f lat and screw the base of the tripod to the black attachment of Vespera.
