Vante 4160, Инструкция по эксплуатации

Страница: 31 / 40

Vante ® Model 4160
23
3. Maintenance
3.1. Cleaning
CAUTION: Never submerge the sealing head in liquid. Submersion of the sealing head in
liquid will damage the heater assembly. Submerging the sealing head in liquid
voids the product warranty.
3.1.1. Sealing head: apply isopropyl alcohol to a cotton swab. Gently wipe the
sealing head plates with the damp swab. Ensure the plates are completely dry
before returning the sealer to service.
NOTE: Wipe the plates clean frequently during operation if you are not using the Teflon
fiberglass adhesive barriers. See Teflon Fiberglass Adhesive Barrier on page 19.
3.1.2. Generator/controller:

Power off the generator/controller. Verify that the main power switch is in the off
(O) position.

Disconnect the AC power cord from the power outlet. Disconnect the air supply
line and the AC power cord from the generator/controller.

Apply a cleaning solution made with water and a mild detergent or household
cleaner, such as Formula 409, to a clean, soft towel. Wipe the exterior
generator/controller case with the damp towel. Ensure that the
generator/controller is completely dry before returning to service.
CAUTION: Do not spray or pour liquid directly onto the controller/generator or the sealing
head. Always apply liquid to a towel or cotton swab.
Do not over-saturate the towel or swab with liquid.
Do not allow excess liquid to flow into the internal parts of the system. If any
liquid contacts the electronic components of the system, the system will
malfunction.
3.2. Product Certification
Vante recommends annual recertification of the 4160 TPE sealing system. Contact Vante to
request a return material authorization (RMA) number. See Returning Materials to Vante on
page 27.