Vanderbilt ACTpro-1500, Инструкция по установке и эксплуатации

Страница: 3 / 18

Table of Contents
1 Overview 4
1.1 Technical specification 4
1.1.1 Electrical specification 4
1.1.2 Relay load 5
1.2 Ordering details 5
1.3 Monitoring 6
2 Installation 7
2.1 ACTpro-1500 7
2.1.1 Mounting 7
2.1.2 Power supply 7
2.2 ACTpro-15002A 7
2.2.1 Mounting 8
2.2.2 Mains power up 8
2.2.3 Load Output 8
2.2.4 Standby Battery 8
2.2.5 Tamper 9
2.3 ACTpro-1500PoE 9
2.3.1 Mounting 9
2.3.2 Power Up 9
2.3.3 Troubleshooting 10
2.3.4 Tamper 10
3 Wiring 11
3.1 Typical wiring of ACTpro-1500 11
3.2 Wiring exit readers 12
3.3 Adding the OSDP EOL Jumper for OSDP Readers 12
3.4 Fire override configuration 12
3.5 Interlock/airlock configuration 13
3.6 Intruder panel wiring 14
4 Defaulting the Controller and IP Address Configuration 15
4.1 Factory default the Controller (DIP switch 2) 15
4.2 DHCP/static IP addressing (DIP switch 1) 15
4.3 Defaulting the static IP address 16
4.4 Changing static IP address on the ACTpro Controller 16
5 Status Indicators 17
5.1 ACTpro-1500 17
5.2 ACTpro-15002A and ACTpro-1500PoE 17
© Vanderbilt 2019 3 A-100535-c
15.03.2019