Vanco HDBaseT Lite, Инструкция по эксплуатации

Страница: 3 / 32

3
2. Features
3. Safety Precautions
FEA
TURES AND SAFETY PRECAUTIONS
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
• Quick and easy installation – set up in seconds straight out of the box.
• Simplified ports - Input: HDMI – Output: Simultaneous HDMI and
integrated RJ45 connectors for a single Cat5e/6/7 UTP cable to each
display point for ease of installation*
* The inclusion of duplicate HDMI ports essentially doubles the
number of outputs (though slaved to the output channel on
the matrix), or allowing connection to Coax, Fibre or full HDBT
extender sets for increased flexibility and length of distribution.
• Conforms to IEEE-568B standards.
• Each HDMI port also supports DVI signals.
• Enables up to 6 (MX0606-PP) and 8 (MX0808-PP) HDMI video/audio
devices to be independently switched through 6
(MX0606-PP) or 8 (MX0808-PP) HDMI displays or projectors for
uncompressed digital distribution.
• Each output able to show any connected source simultaneously
regardless of whether the input carries HDCP encryption.
• HDCP compliant with constant feed to prevent screen dropouts.
• Refined for Custom Install and Home Theatre Installations.
• Reads and copies EDID from connected devices with additional
EDID configuration through customisable DIP switch settings if
necessary.
• The same robust transmission technology as full HDBT that is far more
resistant to electrostatic interference than conventional
non-HDBT distribution.
• HDMI v1.4 with full 3D compatibility with frame packing/sequential
(Blu-Ray) and interlaced stereoscopic (satellite/cable broadcasts).
• Central RS232 control – fully compatible with all market leading control
systems with full integration protocols available for AMX, Control 4,
Crestron, Red Eye, Nevo, RTI, Control FX, Savant, BitWise.
• LAN control – with Control 4 TELNET protocols.
• Wide range, two way discrete IR control between source and display
and vice versa (30 KHz to 56 KHz frequency)
• 2K resolution (compared to 4k resolution with full HDBaseT).
• 36bit Deep Colour (compared to 48bit with Full HDBaseT, and 24bit
PRO).
• 6.75 Gbps bandwidth range/signalling rate (compared to
10.2Gbps with full HDBaseT).
• 70m (230ft) distance range of matrix/extenders – (compared to
100m/328ft HDBaseT or 50m/164ft PRO) can be lengthened by
connecting to multiple 70m extender sets or used with any other
Wyrestorm extenders, such as Coax, full HDBT or Fibre (distances
under perfect transmission conditions*)
• Each Output port can be fed to multiple displays (cascaded).
• Supports all high definition resolution
1. Do not expose this apparatus to rain, moisture,
sprays, drips or splashes and ensure that no
objects containing liquids are placed on the
apparatus, including cups, glasses and vases.
2. Do not place this unit in a confined space such as
enclosed shelving, cabinets or bookshelves.
Ensure the unit is adequately ventilated.
3. To prevent the risk of electric shock or fire hazard
due to overheating, do not cover the unit or
obstruct ventilation openings with material,
newspaper, cardboard or anything that may restrict
airflow into the unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as amplifiers or computers and
do not place near sources of naked flame.
5. Unplug apparatus from power supply during
lightening storms or when unused for long periods
of time.
6. Protect the power cable from being walked on,
pinched or restricted in any way, especially at plug
connections.
7. Only use attachments/accessories specified by the
manufacturer.
8. Units contain non-servicable parts - Refer all
servicing to qualified service personnel.
WARNING
To reduce the risk of fire, electric shock
or product damage:
4
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
FEA
TU
R
E
S AN
D SAFETY PR
E
C
A
UTI
ON
S
MX0404-QI
• Quick and easy installation – set up in seconds straight out of
the box.
• Simplified ports - Input: HDMI – Output: integrated RJ45
connectors for a single Cat5e/6/7 UTP cable to each display
point for ease of installation.
• Conforms to IEEE-568B standards
• Each HDMI port also supports DVI signals.
• Each Output port can be fed to multiple displays (cascaded).
• Enables up to 4 HDMI video/audio devices to be independently
switched through up to 4 HDMI displays or projectors for
uncompressed digital distribution.
• Each output able to show any connected source simultaneously
regardless of whether the input carries HDCP encryption.
• Refined for Custom Install and Home Theatre Installations.
• Reads and copies EDID from connected devices with additional
EDID configuration through customisable DIP switch settings if
necessary.
• 2k resolution supported.
• Fully 3D compatible – Frame sequential 3D (Blu-ray) and
interlaced stereoscopic 3D (satellite broadcasts etc.)
• Supports all high definition resolutions up to and including
1080p and standard video formats.
• RS232 port.
• Choose from 6 switching modes – infrared remote control, front
panel buttons, local IR, IR call-back, LAN and RS232.
• Simple switching remote control included, which can also be
learned into a universal remote handset to allow the control of
multiple devices from one handset.
• Fully compatible for integration with market leading control systems.
• 4 x IR 3.5mm mini-jack ports for each output to link IR from
control system to control display
• Additional infrared extension port for longer IR connections
• HDMI v.1.3
• Supports 24Bit Colour depth
• Signalling rate of 6.75 Gbps
• Pack comes complete with 1 x 4x4 Matrix with 19” rack
brackets, 4 x 40m IR receivers with mounting brackets, IR
receivers, emitters and a Matrix remote control handset.
Additional features included on the RX-1UTP-IR-40
• Transmits one-way signal together with the HDMI signal over a
single Cat5e/6/7 cable.
• Receivers capable of 1080p transmissions up to 40m (131ft)
under ideal conditions*
• For even greater control and fine tuning, each receiver features
a fully adjustable EQ distance range for optimising the
transmission signal.
2. Features
3. Safety Precautions
1. Do not expose this apparatus to rain, moisture, sprays,
drips or splashes and ensure that no objects containing
liquids are placed on the apparatus, including cups,
glasses and vases.
2. Do not place this unit in a confined space such as
enclosed shelving, cabinets or bookshelves. Ensure the
unit is adequately ventilated.
3. To prevent the risk of electric shock or fire hazard due to
overheating, do not cover the unit or obstruct ventilation
openings with material, newspaper, cardboard or
anything that may restrict airflow into the unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as amplifiers or computers and do
not place near sources of naked flame.
5. Unplug apparatus from power supply during lightening
storms or when unused for long periods of time.
6. Protect the power cable from being walked on, pinched
or restricted in any way, especially at plug connections.
7. Only use attachments/accessories specified by the
manufacturer.
8. Units contain non-servicable parts - Refer all servicing to
qualified service personnel.
WARNING
To reduce the risk of fire, electric shock
or product damage:
• Protection against ESD (electrostatic discharge) included within
the unit to further stabilise transmission.
• LED indications for clear power and video signal selection.
• 5v mains supply included but receivers may be powered through the
USB port of the display using Wyrestorm USB to 5v power adaptor)
• Fully cascadable to further lengthen transmission.
*NOTE: ideal conditions denote cable run is within
specified distance range of product, no electrical
interference, the use of straight cable runs with no bends
or kinks and no patch panels or wall outlets used. Please
be advised that the presence of any of these factors in
your installation may compromise bandwidth and signal
strength. For longer transmission distances, RS232 control
and Ethernet pass-through, please see our full HDBaseT
or HDBT Lite range of matrices, transmitters, receivers and
extender sets.
USB to 5V Cable
Part Number
CAB-USB-5V