www.vanco1.com
800.626.6445
6
1. DC 5V: Connect included 5V DC power supply
2. POWER/SIGNAL LED: Blue LED - POWER; Green LED - SIGNAL ACTIVE
3. COAX OUT: Connect an RG6 coaxial cable using BNC connection
4. Micro-USB port: Reserved for available firmware updates; any firmware updates will be accessible on
www.vanco1.com, on the product page under the “Downloads” tab
5. HDMI IN: Connect an HDMI source
6. IR Receiver: Connect the included IR Receiver (RX) to control the display
7. IR Blaster: Connect the included IR Blaster (TX) to control the source
PANEL DESCRIPTIONS
1
Transmitting Unit
Receiving Unit
2
3
4
5
6 7
1. DC 5V: Connect included 5V DC power supply
2. POWER/SIGNAL LED: Blue light - POWER; Green light - SIGNAL ACTIVE
3. COAX IN: Connect an RG6 coaxial cable using BNC connection
4. Micro-USB port: Reserved for available firmware updates; any firmware updates will be accessible on
www.vanco1.com, on the product page under the “Downloads” tab
5. HDMI OUT: Connect an HDMI display
6. IR Receiver: Connect the included IR Receiver (RX) to control the source
7. IR Blaster: Connect the included IR Blaster (TX) to control the display
1
2
3
4
5
6 7
