www.vanco1.com
800.626.6445
3
INTRODUCTION
FEATURES
4K HDMI® over Single Coax Cable with Bi-Directional IR
Part # EV4K2004
•
Allows HDMI audio/video signals to be transmitted using a single coaxial cable
•
Supports up to 4K@60Hz, 4:4:4 chroma subsampling, 8bits and HDR10
•
Transmission range: Extends 4K@60Hz up to 330ft (100m); 4K@60Hz and HDR10 up to 230ft (70m)
over a single RG6 coaxial cable
•
HDMI 2.0 and HDCP 2.2/1.4 compliant
•
Uncompressed 2CH digital HDMI over coaxial cable transmission
•
Audio sample rate supports 32KHz, 44.1KHz, 48KHz
•
Auto signal equalization and dynamic EDID
•
Supports full frequency IR signal from 20KHz to 60KHz
•
Bi-directional IR pass-through for source and/or display control
•
Compact and wall mounting housing design for easy and robust installation
•
Dimensions: 3.5” x 3.7” x 1”
The Evolution by Vanco EV4K2004 HDMI Extender can send and receive 4K resolutions over single RG6 coaxial cable with Bi-
directional IR. Capable of extending 4K@60Hz up to a distance of up to 330ft/100m and 4K@60Hz with HDR10 High Dynamic
Range up to 230ft/70m. The EV4K2004 also features bi-directional IR, which allows for control of the source or display. Also
features dynamic EDID management, which allows and encourages source and display “handshake” for seamless integration.
Compact design with mounting ears included, for an easy and flexible installation. Can’t run a Cat6 cable to a location? No
problem, the EV4K2006 is a great solution for applications which already have an existing RG6 coaxial cable in place.
The EV4K2004 includes two units: transmitting unit (EV4K2004-TX) and receiving unit (EV4K2004- RX). The transmitting
unit is used to capture the HDMI input with IR signals and carries the signals via one RG6 coaxial cable. The receiving unit is
responsible for equalizing the transmitted HDMI signal and reconstructing IR and control signals. The EV4K2004 offers the
most convenient solution for HDMI extension over a single coaxial cable with long distance capability, and provides a solution in
applications where additional cables cannot be installed.
*Installation Note: RG6 coaxial cable must be used, RG59 and mini coax will not work with this product; coaxial connections
must be BNC and home-run cable strongly recommended.
PACKAGE CONTENTS
•
EV4K2004 (TX & RX)
•
(1) IR Blaster (TX)
•
(1) IR Receiver (RX)
•
Mounting Hardware
•
(2) DC 5V, 2A Power Supplies
•
Product Manual
