IR Transmitter
Receiver
IR Receiver
BluRay® Player
HDTV
HDMI
HDMI
IR Transmitter
IR Receiver
HDMI over Coax Cable
Transmitter
Front
Back
Front
Back
www.vanco1.com
800.626.6445
7
CONNECTION DIAGRAM
CONNECT AND OPERATE
1. Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc.
to the HDMI input on the transmitting unit
2. Connect a display such as an HDTV or HD Projector to the HDMI output on the Receiving unit
3. Connect a single RG6 coaxial cable to the “COAX OUT” connector of the transmitting unit, and then to the
“COAX IN” connector of the Receiving unit using BNC connections
4. For power, plug in the transmitting and receiving units with included DC 5V 2A power supplies
5. Power on each device in the same sequence (transmitter and receiver will already be powered when either
unit is plugged in)
At this point the display connected should display the source signal connected to the extender set. If no signal
is being displayed, check coax cables and connections