Vanair Goodall CAP-START, Инструкция по эксплуатации и список запасных частей, Страница: 31 / 60

SECTION 6:
TROUBLESHOOTING
SECTION 6: TROUBLESHOOTING
090189-OP_r0 (JUNE-2022) 6 - 1 VANAIR MANUFACTURING, INC.
(844) VAN-SERV • www.vanair.com
Cap•Start Hydraulic-Driven
12V/24V • Battery Starter • Charger
6.1 GENERAL INFORMATION
This section contains symptoms and usual caus-
es for the most common types of problems that
may occur. All available data concerning the trou-
ble should be systematically analyzed before un-
dertaking any repairs or component replacement.
A visual inspection is worth performing for almost
all problems and may avoid unnecessary addi-
tional damage to the machine. The procedures
which can be performed in the least amount of
time and with the least amount of removal or dis-
assembly of parts should be performed
fi rst.
WARNING
Before starting, performing maintenance, or
replacing parts, relieve the entire system pres-
sure by opening a service valve, which will vent
all pressure to the atmosphere.
Although Vanair
®
strives to anticipate situations
that may occur during the operation life of the ma-
chine package, the Troubleshooting Guide may
not cover all possible situations. Should the situa-
tion remain unresolved after exhausting available
sources, contact the Vanair Service Department
at:
Toll Free: 844-VAN-SERV 844-[826-7378]
Phone: 219-879-5100
Fax: 219-879-5335
This section contains symptoms and usual caus-
es for the most common types of problems that
may occur. All available data concerning the trou-
ble should be systematically analyzed before un-
dertaking any repairs or component replacement.
A visual inspection is worth performing for almost
all problems and may avoid unnecessary addi-
tional damage to the machine. The procedures
which can be performed in the least amount of
time and with the least amount of removal or dis-
assembly of parts should be performed
fi rst.
Although Vanair strives to anticipate situations
that may occur during the operation life of the ma-
chine package, the Troubleshooting Guide may
not cover all possible situations. Should the situa-
tion remain unresolved after exhausting available
sources, contact the Vanair Service Department,
with the machine serial number readily available
(refer to
Figure 6-1 ).
NOTE
When contacting the Vanair Service Depart-
ment, please have machine serial number on
hand to quickly expedite service. Serial number
can be located on the serial plate, as shown.
Figure 6-1: Machine Serial Plate/Serial
Number Location