Assembly & Installa
Ɵ
on Guide
EASI-LOAD 3 - SINGLE LADDER KIT
REF: 699-0777-08a
EASI-LOAD 3:
SINGLE LADDER KIT
CUSTOMER SERVICE AND TECHNICAL SUPPORT
TEL: 0800 107 0003
E-MAIL: [email protected]
6
DETERMINE IF EASI-LOAD SYSTEM IS SAFE TO LOWER, IF AT AN UNSAFE LOCATION IT MAY CLASH WITH THE VEHICLE BODY.
5
LOCATE EASI-LOAD SYSTEM INTO DESIRED POSITION ON VEHICLE, WE ADVISE THIS IS EITHER CENTRAL OR ON THE LEFT-HAND SIDE..
PHASE 2 CONTINUED
8
ADJUST EASI-LOAD TO ACHIEVE REF ‘Z’, THIS MUST BE BETWEEN 50 AND 150mm FROM THE MOST PROTRUDING PART OF VEHICLE BODY.
ADJUST THE CARRIAGE LOCATION TO ACHIEVE THE REQUIRED DISTANCE ‘Z’, SIMPLY SLIDE FORWARD OR BACKWARDS
MUST BE LOCATED BETWEEN 50 & 150mm FROM MOST PROTRUDING PART OF VEHICLE BODY
IMPORTANT
SLIDE / ADJUST CARRIAGE
TO ACHIEVE REF ‘Z’
REF ‘Z’ MUST BE
BETWEEN 50 & 150mm
‘Z’
IMPORTANT
TAKE CARE WHEN LOWERING FOR FIRST TIME
ENSURE CARRIAGE IS PAST THE REAR OF VEHICLE
SAFE TO LOWER
BUT TAKE CARE
UNSAFE TO LOWER
ADJUST LOCATION
A:
B:
ONCE CATCH IS RELEASED PULL DEPLOYMENT HANDLE TOWARDS YOU TO LOWER INNER CARRIAGE.
7
LOCATE EASI-LOAD DEPLOYMENT HANDLE (2) ONTO EASI-LOAD HANDLE AS SHOWN AND SLIDE ACROSS TO RELEASE CATCH.
2
A
B
LOWER IN CONTROLLED
MANNER
ENSURE CARRIAGE WILL
NOT HIT VEHICLE BODY
ENSURE ADEQUATE
SPACE AVAILABLE ABOVE
& BEHIND VEHICLE
DO NOT STAND UNDER
CARRIAGE
LOCA
TE EASI-LOAD
LO
CA
TE
EA
SI-
LO
AD
IN DESIRED POSITION
IN
D
ES
IR
ED
PO
SIT
IO
N
LOCA
TE EASI-LOAD
IN DESIRED POSITION
