2.0
2.1
2.0
2.1
2.0
1.9
2.0
LOCATE BUMP STOP BRACKET ON EASI-LOAD BASE UNIT AT LOCATION INDICATED.
‘X’
TOP OF CROSSBAR
GROUND LEVEL
Assembly & Installa
Ɵ
on Guide
EASI-LOAD 3 - SINGLE LADDER KIT
REF: 699-0777-02a
EASI-LOAD 3:
SINGLE LADDER KIT
CUSTOMER SERVICE AND TECHNICAL SUPPORT
TEL: 0800 107 0003
E-MAIL: [email protected]
A:
B:
LOCATE x2 SLOT WASHER ASSEMBLIES INTO EASI-LOAD BASE UNIT CHANNELS AS SHOWN.
4
LOCATE A M8 x 20mm COACH BOLT (11) INTO SLOT WASHER (9) AS SHOWN, x4 REQUIRED.
3
USING HEIGHT CHART LOCATED ADJACENT TO BUMP STOP BRACKET, FOLLOW SEQUENCE ABOVE TO SET BUMP STOP BRACKET
TO DIMENSION ‘X’ AS DETERMINED AT STAGE 1.
MEASURE THE DISTANCE FROM GROUND LEVEL TO THE TOP OF PREFITTED CROSSBARS, THIS WILL BE IDENTIFIED AS ‘X’.
1
PHASE 1: ASSEMBLY OF LADDER RETENTION SYSTEM
2
RELEASE FASTENERS ENOUGH TO
ALLOW BUMP STOP TO SLIDE
USE 5mm ALLEN KEY
USING HEIGHT CHART, LOCATE
BUMP STOP TO DIMENSION ‘X’
TIGHTEN FASTENERS AND
ENSURE BUMP STOP IS SECURE
‘X’
BUMP STOP BRACKET
1.7
1.8
1.9
2.0
2.1
A
B
C
9
x4 REQUIRED
11
