Assembly & Installa
Ɵ
on Guide
EASI-LOAD 3 - SINGLE LADDER KIT
REF: 699-0777-05a
EASI-LOAD 3:
SINGLE LADDER KIT
CUSTOMER SERVICE AND TECHNICAL SUPPORT
TEL: 0800 107 0003
E-MAIL: [email protected]
A -
LOCATE EACH 700mm CROSSBAR 275mm FROM LADDER BAR BRACKET, THIS IS FROM THE ALUMINUM EDGE NOT END CAP.
B -
SECURE FASTENERS HOLDING EACH LADDER BAR BRACKET IN POSITION, ENSURE CROSSBAR AND BRACKET DO NOT MOVE.
13
PHASE 1 CONTINUED
LOCATE x1 LOCK NUT (8) INTO EACH END OF EACH 700mm CROSSBAR, ENSURE LOCK NUTS ARE LOCATED IN ORIENTATION SHOWN.
14
275mm
SECURE FASTENERS
TIGHTEN TO 23Nm
USE 4mm ALLEN KEY
LOCATE EACH CROSSBAR 275mm
FROM LADDER BAR BRACKET
15
16
8
8
6
LOCATE x1 IN EACH END
OF EACH CROSSBAR
ALIGN LOAD STOPS (6) IN THE ORIENTATION SHOWN WITH LOCK NUTS AND LOOSELY ATTACH, REPEAT ON BOTH CROSSBARS
IMPORTANT, TIGHTEN FASTENERS AND ENSURE ALL LOAD STOPS ARE SECURE.
A -
LOCATE LOAD STOPS TO DESIRED WIDTH / LOCATION.
B -
SET T
O DESIRED WIDTH / LOCA
TION
6
10
13
8
