A -
LOCATE THE CENTRE OF LADDER STAY (4) 1300mm FROM THE END OF EASI-LOAD BASE UNIT ALUMINIUM BODY.
B -
SECURE FASTENERS HOLDING LADDER STAY IN POSITION, ENSURE LADDER STAY DOES NOT MOVE.
Assembly & Installa
Ɵ
on Guide
EASI-LOAD 3 - SINGLE LADDER KIT
REF: 699-0777-03a
EASI-LOAD 3:
SINGLE LADDER KIT
CUSTOMER SERVICE AND TECHNICAL SUPPORT
TEL: 0800 107 0003
E-MAIL: [email protected]
USING PREVIOUSLY INSERTED SLOT WASHER ASSEMBLIES, LOOSELY ATTACH LADDER STAY ONTO EASI-LOAD BASE UNIT.
5
6
LADDER STAY (4) MUST
BE FITTED AS SHOWN
A:
B:
LOCATE x1 SLOT WASHER ASSEMBLY INTO EACH EASI-LOAD BASE UNIT CHANNEL AS SHOWN.
7
LOCATE A M8 x 20mm COACH BOLT (11) INTO SLOT WASHER (9) AS SHOWN, x4 REQUIRED.
9
x4 REQUIRED
11
PHASE 1 CONTINUED
4
4
14
15
9 & 11
IMPORTANT: THE LADDER STAY (4) MUST BE FITTED IN THE ORIENTATION SHOWN.
USING PREVIOUSLY INSERTED SLOT WASHER ASSEMBLIES, LOOSELY ATTACH 700mm CROSSBAR ONTO EASI-LOAD BASE UNIT.
8
700mm CROSSBAR (3)
MUST HAVE SLOT AT TOP
5
14
15
9 & 11
IMPORTANT: 700mm CROSSBAR (3) MUST BE FITTED WITH THE SLOT AT TOP.
1300mm
3
5
SECURE FASTENERS
TIGHTEN TO 23Nm
