Vacon 100 Flow
page
18
3.11 Default page display
Parameter P5.7.2 allows the default page to be determined (e.g. Multimonitor). The timeout
period is entered in parameter P5.7.1.
If the keys of the regulator are not used before the pre-set timeout period, the display will
return to the default page.
3.12 Saving and loading parameter s factory setting
Parameter backup allows saved parameter settings to be loaded from the control panel. In
addition, factory settings can also be loaded, and 2 user-defined parameter settings saved
or loaded.
3.13 Parameter lock
To prevent unauthorised changes, it is possible to hide the parameter folders with an access
code.
Go to parameter M8.2, and set an access code to protect parameters. Go to parameter M8.1
and change to monitor or favourites.
Monitor: only the monitoring and main menus are visible
Favourites: Only main menus visible, and only parameters in favourites are available.
The parameter lock is deactivated by setting parameter M8.1 to normal and confirming with
the access code.
Please note!
Make arrangements within your organisation on the use of this code, so that your colleagues
can also modify this control.
OK
OK
OK
OK OK
