Van der Ende Groep · Aartsdijkweg 23, 2676 LE, Maasdijk · Tel. 0174 515050
IBAN NL71 RABO 0340341610 · KvK Den Haag 27230471 · Btw-nummer NL8000.78.378.B01 · [email protected] · www.vanderendegroep.nl
Page 25 of 32
6
Operation/using for the first time
Operating the fan of the Airmix™ is simple: if it is connected to the power sup
ply it will start
ventilating, if it is disconnected it will stop ventilating. It is possible to set the speed by adjusting the
voltage at the plug with a control transformer, but this is however, lies outside the scope of the
Airmix™
manual.
6.1
Connection diagram fan
6.1.1
Connection diagram ZN045 AC fan 230 V ~1 50 Hz
If the ZN045 AC 230 V ~1 fan has a connection frequency of 60 Hz, it is connected identically to the
fan operating at 50 Hz.
Note: In this scheme, the thermostatic switch is not connected yet
(see Figure 20 and 18) !
6.1.2
6.1.2 Connection diagram ZN045 AC fan 230/400V D/Y ~3 50 Hz
Wiring scheme 230 V
Wiring scheme 400 V
6.1.3
6.1.3 Connection diagram ZN045 EC-fan 200-277 V AC ~1 50/60 Hz
Figure 22 Connection diagram
s fans for the Airmix™
