ELECTRIC BICYCLE METER KT
—
LCD7 Product User Manual
- 31 -
efficiency
4
Class4 braking strength
Poor energy recovery
efficiency
5
Class5 braking strength
Bad energy recovery
efficiency
The recommended value of C13 is 1; other values need to be chosen with caution for
use.
Be sure to note:
1.
the higher is the braking intensity level, and the braking strength will be greater,
the greater damage to the motor shaft accordingly.
2.
If the battery has a BMS function, disable this function.
After finishing the parameter setting of C13, press
(SW) button for short to enter
C14 parameter setting interface.
○
C14 Power-assist Tuning Parameters Setting
Enter into C14 parameter setting interface, C14 parameter bar flashes.
C14 parameter setting interface
C14 is the parameters of power-assist tuning setting, with the default value of 2. The
power-assist is between1-4 gear, and it is invalid until P3 equals to 1. The setting range 1-3,
and press
(UP) button or
(DOWN) button for short to make selection.
C14 parameter definition table:
C14 Value
Assist strength of intelligent pedal motor
1
Weak assist strength of motor
2
General assist strength of motor
3
Stronger assist strength of motor
After finishing C14 parameter setting, hold
button
(SW)
shortly to save current
set values and enter C1 parameter setting interface again. Or hold
button
(SW)
long
for about 2 seconds to exit C parameter setting environment and return to the display 1.
○
Exit C Parameter Setting
Among the fourteen C parameter settings, when each parameter setting is completed,
