ELECTRIC BICYCLE METER KT
—
LCD7 Product User Manual
- 15 -
○
Metric and Imperial Units
After finishing the wheel diameter setting, enter into the metric/imperial units setting
interface, and then the speed and mileage unit flash. Hold
button (
UP
) or
button
(DOWN)
shortly to make sync selection of three metric/imperial units as speed,
mileage, and the environment temperature.
Setting Interface of Metric/Imperial Units
Definition Table of Metric/Imperial Units
：
Display
Metric
Imperial
Riding speed
KM/H
MPH
Total distance
KM
Mil
Under the metric/imperial units setting interface, if there’s no button operation
on the meter for more than 1 minute, and then the meter will automatically return to
display 1, and the original set units will be saved.
After finishing the metric/imperial units setting, hold
button shortly
(SW)
to
save the current set values, and then speed and mileage units stop flashing. Hold
button
(SW)
shortly again, and the meter will enter into the maximum riding speed
interface again, or hold
button
(SW)
long for about 2 seconds to exit the general
project setting environment and return to display 1.
○
Exit General Project Setting
Among the three general project settings, after each setting is completed, if hold
button (SW) long for about 2 seconds, all can exit the setting environment and return to
display 1, meanwhile, the current set parameters are saved.
