ELECTRIC BICYCLE METER KT
—
LCD7 Product User Manual
- 9 -
In display 3, hold
button (
SW
) shortly again to enter display 1.
In each display interface, if you hold
button (SW) long, the meter will be
powered-off together with that of the controller.
○
Display of Turned on Throttle
Rotate the throttle control handle under normal operating of the meter, the display
interface shows the sign of turned-on throttle, see the Figure below. The sign will be off
automatically after about five seconds.
○
Display of Power-assist Startup
The meter is driving with power-assist under normal operating conditions, the display
interface flashes the power-assist startup sign (PAS) as shown in the figure. The sign will
be off automatically after about five seconds.
○
PAS Ratio (or Throttle) Gear Switch
Under normal operation, hold
button
(UP)
or
button
(DOWN)
to
switch the power-assist ratio (or throttle) gear
(ASSIST)
, changing motor output power.
