background image

Operator Protection Structure (OPS)

DANGER: Protection against penetrating objects is not provided

(no OPS available) if the cab of your tractor is fitted with windows

made of glass. Protection against penetrating objects is provided

in accordance with ISO 8084 (OPS is available) if the cab of your

tractor is fitted with windows made of polycarbonate, except the

Side visibility cab (no OPS in Side visibility cab). Before operating,

make sure the protection is adequate for your work conditions.

Hazardous substances EN 15695-1:2009

DANGER: The cab is classified as category 2 according to the

draft of EN15695-1:2009. Protection against dust is provided.

Protection against hazardous substances (agricultural chemicals,

etc.) is not provided. Personal protective equipment must be used

according to the chemical manufacturer's recommendations.

Without air conditioning and with manual air conditioning the fan

knob position must be 3 or higher and recirculation must be

closed. With automatic air conditioning the fan speed must be set

to maximum.

Forest work

When working in forest, pay special attention to safety issues. The

specific dangers related to forest work are overturning, falling objects and

penetrating objects.

1.2.4.2 

Getting into and out of the cab

When getting into and out of the cab, pay special attention to safety issues.

Always use three-point contact with the tractor and face the tractor when

getting in and out.

Use handrails, grab handles and steps when getting in and out.

Do not use the control levers as a handhold.

Do not step on pedals when getting in and out.

Never attempt to get into or out from a moving tractor.

Never jump off a tractor.

1.2.4.3 

Driving on public roads

When driving the tractor on public roads, pay special attention to the safety issues.

Before driving

Check that the tractor is safe for driving on the road.

Adjust the rear view mirrors to give the correct viewing angle.

Lock the check links with pins when transporting implements using three-

point linkage.

1. Safety precautions

- 18 -

Содержание HiTech T3 Series



















































































































































































































































































































































































Отзывы: