1
2
3
GUID-809DAC4C-E367-4CBD-BDE6-54B340ED071E
1. Low pressure filter of the transmission system
2. Transmission lubrication filter
3. Pressure filter of the hydraulic system
Oil filters are located on the right side of the tractor under the cab. The return oil
filter is labelled with the text HYD on the mounting piece on top of it. The
lubrication filter is indicated with the text LUB on the mounting piece on top of it.
The low pressure filter is indicated with the text TRANS on the mounting piece on
top of it.
1. Release the pressure sensor wires of the auxiliary hydraulics return oil filter.
2. Run the engine.
3. Check if the pressure oil filter clogging indicator light is lit.
If the indicator light does not come on, the fault is in the return oil filter.
4. Change the return oil filter if the blocking is caused by this filter.
5. Release the pressure sensor wires of the pressure filter of the hydraulic
system if the indicator light still comes on.
6. Run the engine.
7. If the indicator light does not come on, the fault is in the pressure filter of the
hydraulic system.
8. Change the pressure filter of the hydraulic system if the blocking is caused by
this filter.
9. Change the transmission lubrication filter and the low pressure filter of the
transmission system if the indicator light still comes on.
IMPORTANT: If the blocking is in one of the transmission filters and it occurs
considerably ahead of scheduled replacement of the filters, it may be an
indication of partial damage to the transmission system. In this case, further
investigations need to be made to avoid additional damage to the
transmission system.
5. Faults and remedial actions
- 329 -