background image

 

 

 

Part No. 115661 

 

 

© Valtir, LLC 

www.Valtir.com  

Revision C February 2023

 

Triton Barrier

®

 

TL-2 & TL-3 

Applications 

 

Assembly Manual 

15601 Dallas Parkway 

Suite 525 

Addison, Parkway, 75001 

 

 

Important:

  These instructions are to be used only in conjunction with the 

assembly, maintenance, and repair of the Triton Barrier

®

  system. These 

instructions are for standard assembly  specified by the appropriate highway 

authority. In the event the specified system assembly, maintenance, or repair 

would require a deviation from standard assembly  parameters, contact the 

appropriate highway authority engineer. This system has been accepted for use 

by the Federal Highway Administration for use on the national highway system 

under strict criteria utilized by that agency. Valtir representatives are available for 

consultation if required.  

This Manual must be available to the worker overseeing and/or assembling the product 

at all times.  For additional copies, contact Valtir  at (888) 323-6374  or download from 

websites below. 

The instructions contained in this Manual supersede all previous information and Manuals. All 

information, illustrations, and specifications in this Manual are based on the latest Triton Barrier

®

 

system information available to Valtir  at the time of printing. We reserve the right to make 

changes at any time. Please contact Valtir to confirm that you are referring to the most current 

instructions. 

 

 

Содержание Triton Barrier TL-2





























Отзывы: