VALTIR Triton Barrier TL-2, Инструкция по сборке

Страница: 19 / 28

www.Valtir.com 18 Revision C February 2023
End Treatment Configuration (TL-3)
Notes:
1. Fill all sections except the first section with water. First section is to be upside down. Do
not use a connecting pin on the exposed end of the first section.
2. Vehicle trajectory will be biased toward the flare side of a flared configuration.
3. All sections are to have pedestals strapped to the bottom. The first section uses a short
pedestal.
End Treatment Configuration (TL-2)
Notes:
1. Fill all sections except the first section with water. Do not use a connecting pin on the
exposed end of first section.
2. Vehicle trajectory will be biased toward the flare side of a flared configuration.
Figure 10
Triton Barrier ® (TL-2) 70 km/h [45 mph] End Treatment Placement
Figure 9
Triton Barrier
®
TL-3 100 km/h [62 mph] End Treatment