5) Pairing the wireless earpiece with a second mobile phone
Repeat from Step 2 onwards as shown in “Pairing the wireless earpiece” section to pair and
connect with the second mobile phone.
Note: Place the wireless earpiece in the docking station to enter sleep mode for energy conservation. When
picked up from the docking station, it will automatically reconnect with the two mobile phones.
6) Wireless earpiece controls
a) Answering an incoming call
• Press the multifunctional button once to pick up.
• Press again to end a call or by placing it back to the docking station.
Note: When wireless earpiece is on the docking station, it will automatically pick up the incoming call after
about 5 seconds. The LED indicator on the earpiece will flash Blue when there is an incoming call.
b) Rejecting an incoming call
• Press and hold the multifunctional button for about 2 seconds to reject the call.
c) Answering a second call (2 mobile phones connected)
• Press the ‘Multifunctional’ button twice to pick up the new incoming call and the first call
would be put on hold
• Press once to end the current call and answer the new incoming call.
• Press again to end the call and resume the previous call (on hold).
d) Rejecting the second call (2 mobile phones connected)
Press and hold the ‘Multifunctional’ button for about 2 seconds to reject the second call.
e) Re-dial last called number
Press the ‘Multifunctional’ button twice to dial the last dialed number.
There will be a voice prompt playing, “Last number re-dial” before calling.
f) Voice dialing
• Press and hold the ‘Multifunctional’ button for about 2 seconds and tell the phone who you
wish to call.
• Press and hold the ‘Multifunctional’ button for about 2 seconds again to cancel this
function.
Note: This function only supports mobile phones with voice dialing function.
