g) Volume
• Control the volume by pressing the Volume ‘+’ button to increase the volume; press the Volume ‘–’ button to
decrease the volume.
• To mute the microphone of the earpiece, press the Volume ‘+’ & ‘–’ buttons simultaneously.
• A low tone will be played to indicate that the microphone is being muted.
Note: When the microphone is muted, an alert would be played repeatedly every 10 seconds.
h) Play and Pause music
While playing music from your mobile phone and there is an incoming call, the music will automatically pause,
allowing you to pick up the call.
When the call has ended, the music will also automatically resume playback.
7) Turning OFF the earpiece
Push the switch downwards to ‘OFF’ to turn off the earpiece and the LED indicator at the back will flash Red
three times.
There will be a voice prompt playing, “Power off” before shutting down.
TROUBLESHOOTING
Issue 1: Earpiece is unable to connect successfully to your mobile device
Problem 1: Earpiece’s battery is flat
Solution: Fully charge the earpiece (2 hours) and retry connection with your mobile phone.
Problem 2: Earpiece not paired to your mobile phone
Solution: Make sure that the earpiece is successfully paired upon selecting ‘Valore BL-V1’ in the device list.
Problem 3: Earpiece and mobile phone too far apart
Solution: Make sure that the earpiece is within a metre range during pairing and connection.
Problem 4: Earpiece is already connected to two mobile phones
Solution: Make sure that the earpiece has already been disconnected from one or both mobile phones before
making a new connection with a new phone.
Issue 2: Sound from the earpiece is too soft or silent
Problem 1: Earpiece’s battery is low / flat
Solution: Fully charge the earpiece (2 hours) and retry connection with your mobile phone.
Problem 2: Earpiece or mobile phone’s volume is too low
Solution: Turn the volume of the earpiece or mobile phone up to increase the volume.
Problem 3: Music track may not be audible
Solution: Make sure that the music track is of a playable format for the mobile phone.
Problem 4: Earpiece and mobile phone might not be connected properly.
Solution: Repeat the connection step via Bluetooth again to make sure that it is connected properly and try
again.
