Valor Vogue 1300IRN, Инструкция по установке и эксплуатации

Страница: 13 / 46

13
Framing & Hearth Requirements
Framing Dimensions with Hearth
Surface of
Combustible
Floor or Carpet
#
1335
Three-Sided Trim is flush
with bottom of appliance.
Wood is Allowed
Directly Below
Fireplace
Non-Combustible
Finish
Three-Sided
Trims
Less
than
2”
1/2” Insulation
Board supplied
with 3-sided
surround plate
(excess may be cut off
or run below fireplace)
Min. 9” of hearth protection required if bottom
of heater is less than 2” above combustible floor
Non-combustible substrate construction detail - Required when using 3-sided surround plates or
no surround plate and hearth/floor is within 2” of bottom of appliance
21-1/2”
36”
43-1/2”
When using 3-sided surround plate or no surround
plate, any surface directly in front of the unit which
is at a height of less than 2” from the bottom of
the unit must be non-combustible
extending
a minimum of 9” and have a 1/2” insulation board
beneath (supplied with 3-sided surround 1335 -
order insulation board separately if not using a
surround plate). See Non-combustible substrate
construction details diagram below.
1/2” thick cement board required above and on
each side of engine (supplied w/engine)
Cement board at sides is not required
when using 1365 4-sided surround or
1370 4-sided surround
Between underside
of header and bottom
of firebox
Combustible framing allowed
beneath fireplace. When
the appliance is installed directly
on carpeting, tile or other
combustible material other
than wood flooring, the appliance
shall be installed on a metal
or wood panel extending the
full width and recessed
depth of the appliance
Hearth
Bottom of
firebox
Cement
Board
Min. 1” between top of
finished hearth and
bottom of firebox if using
#1337 Four-Sided Trim.
Min. 2-3/4” if using #1365 or
#1370 Four-Sided Surrounds.