Valor regency 328 Скачать руководство пользователя страница 4

This appliance does not contain any component

manufactured from asbestos or asbestos related

products.
The appliance data label is on the inner face of the
back panel at the lower left hand side. It is visible
when the outer case is removed.

Gas:

Natural (G20) 

Inlet pressure:

20mbar (8in. w.g.)

Input -    Max:

5.28kW (18,000Btu/h)

(Gross)   Min:

1.25kW (4,300Btu/h)

Output -  Max:

3.2kW (10,900Btu/h)

Min:

0.56kW (1,900Btu/h)

Burner injectors:
Upper (Centre radiant)

Bray cat 28 size 120

Lower (Outer radiants) 

Bray cat 28 size 250B

Burner test pressure
(cold): 

18.3mbar (7.2in w.g.)

Inlet pipe connection:

Rp1/4 (1/4” BSP)

Pilot & Atmosphere
sensing device

SIT ref. OP9044

Ignition:

Piezo electric
Integral with gas tap

Aeration:

Non-adjustable.

2.1

For the user’s protection, in the United
Kingdom it is the law that all gas appliances
are installed by competent persons in
accordance with the current edition of the Gas
Safety (Installation and Use) Regulations.
Failure to install the appliance correctly could
lead to prosecution. The Council for the
Registration of  Gas Installers (CORGI)
requires its members to work to recognised
standards.
In the United Kingdom the installation must
also be in accordance with:

A. These instructions.
B. All the relevant parts of local regulations.
C. The current edition of the Building Regulations

issued by the Department of  the Environment
and the Welsh Office or the Building
Standards (Scotland) Regulations issued by
the Scottish Development Department.

D. All relevant codes of practice.
E. The relevant parts of the current editions of the

following  British Standards:-
BS 715

BS 1251

BS 1289 Part 1

BS 1289 Part 2

BS 4543 Part 2

BS 5440 Part 1

BS 5440 Part 2

BS 5871 Part 1

BS 6461 Part 1

BS 6891

In the Republic of Ireland the installation must also conform with

the relevant parts of:

a) The current editions of:-

IS 813
ICP3

b)

All relevant national and local rules in force.

2.2

The appliance must not stand on a carpet or
any other combustible material.

If a panel has to be fitted to the fireplace opening to meet the

required opening sizes shown in these instructions it must be

made of non-combustible material.

2.3

The appliance can be installed in the
following situations.

Page 4

1.APPLIANCE DATA

INSTALLATION & SERVICING INSTRUCTIONS

2. GENERAL INSTALLATION

REQUIREMENTS

Valor Folium Format U/down 12/4  5/22/00  9:33 AM  Page 4

Содержание regency 328





















Отзывы: