manualshive.com logo in svg

Valor regency 328, Инструкция по установке и обслуживанию

Поделиться
Скачать
Valor regency 328 Скачать руководство пользователя страница 18

Page 

OWNER SECTION............................................................................................4
Operating the Fire.....................................................................................................5
Cleaning....................................................................................................6
Replacing the radiants..............................................................................................7
Maintenance.............................................................................................................7

Page 3

LIST OF CONTENTS

THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20)

AT A SUPPLY PRESSURE OF 20mbar (8in w.g.)

THIS APPLIANCE IS FOR USE IN THE UNITED KINGDOM (GB)

AND THE REPUBLIC OF IRELAND (IE) ONLY

We trust that these instructions give sufficient details to enable this appliance to be
installed and maintained satisfactorily. However, if further information is required,
our 

Valor advice line

will be pleased to help.

Ring 0345 626 341 (Local call rates apply). 

CUSTOMER CARE

Please leave this Guide with the user

Valor Folium Format U/down 12/4  5/22/00  9:33 AM  Page 18

Содержание regency 328





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды