Valor H6 Series Скачать руководство пользователя страница 5

5

Front outlet

Side outlet

This manual and particularly the preceeding and following pages contain very important information regarding 
the safe operation of your fi replace as well as maintenance instructions. Read carefully 

before operating your 

fi replace and pay special attention to the safety warnings.

A heating gas appliance does require safe handling. For this reason, we very strongly recommend children are not  
allowed to touch the fi replace or controls. 

Install a screen or barrier in front of the fi replace to protect your children 

against severe burns.

This appliance is designed and approved as a supplemental heater and provides the potential for most 
energy conservation when used while attended. The use of an alternate primary heat source is advisable.

Do not put

 

furniture or other objects 

in this space in front of 

the fireplace:

36” (0.9 m)

Fireplace

Hearth

WARNING

HeatShift 
Duct Kit:
Do not cover 
or place items 
in front of or 
on top of 
outlet(s)!

!

!

WARNING 
EXTREMELY HOT!!!

• 

Read the safety information on pages 3 and 
4 of this manual before operating your gas 
heater.

•  Some parts of your fi replace are 

extremely hot,

 

particularly the 

glass

 window.

•   

Do not let children touch the glass

 or any 

parts of your fi replace 

even after it is turned 

off 

 as it is still hot.

• 

Use the  barrier screen 

provided with the trim 

or a  gate to reduce the  risk of severe burns.

•  Keep the remote control handset 

out of reach 

of children.

•   

Hot wall surfaces!

 The wall directly above the 

fi replace is 

very hot

 when the fi replace heats. 

It is constructed of non-combustible materials 
and although safe, it may reach temperatures 

in 

excess of 200º F

 depending on choice of trims 

or optional accessories. 

DO NOT TOUCH! We 

recommend installing the optional  LDK Heat-
Shift Duct Kit when hot walls are a concern. 

• 

Hot hearth/fl oor surface!

 The hearth or fl oor 

directly in front of the fi replace is very hot when 
the fi replace heats. Even if constructed of non-
combustible materials, and although safe, it 
may reach temperatures 

in excess of 200º F 

depending on choice of materials. 

Do not step 

on it!

• 

•  Some materials or items, although safe, may 

Some materials or items, although safe, may 
discolor, shrink, warp, crack, peel, and so on 

discolor, shrink, warp, crack, peel, and so on 
because of the heat produced by the fi replace. 

because of the heat produced by the fi replace. 

Avoid placing

Avoid placing

 candles, paintings, photos, and 

 candles, paintings, photos, and 

other items 

other items 

sensitive to heat

sensitive to heat

  within 36 inches 

(0.9 m) around the fi replace.

• 

•  Solid wood fl ooring in front of the fi replace (if al-

Solid wood fl ooring in front of the fi replace (if al-
lowed) may shrink during the heating season 

lowed) may shrink during the heating season 
due to heat.

due to heat.

SAFETY AND YOUR FIREPLACE

!

Содержание H6 Series

















































































Отзывы: